
Ford 8.8 kit V4!
Published: 01-16-23 10:00:38
Product Releases
We are always in the pursuit of improvement. We want to make good better, and every time we reorder our products we push to find small ways to improve them.We spent a ton of time making our original F8.8 subframe as good as it can be but there's a certain level of experience that comes with selling these kits and helping install them for a couple years. We also took to the community and asked for any improvements they saw. Together we found a few small ways to make it better, easier, and more co...

Supercharged N52 E90 is back for 400whp!
Published: 10-11-21 08:00:00
Product Releases
A few months after we let our 350whp 9psi supercharged N52 out into the wild, the owner is back for more! This time, we are swapping in an N54 intake manifold, and a slightly smaller 3.4" supercharger pulley resulting in a peak boost pressure of 11psi. The benefits of the N54 manifold stem from its simple, large, and boost oriented design, the manifold should outflow the original 3-stage intake system whenever there is positive pressure.Take a look at our last session with this car to see what i...

22RPD Fuel Pump Hangar Design
Published: 12-04-20 05:00:00
Product Releases
In 2019 we started using AEM's 400LPh fuel pump. This is an upgraded version of the legendary Bosch 044 pump. We have liked them so much we decided to design a plug and play solution for the e36 platform. In this article we will discuss what makes this pump exceptional and we will detail our new solution for the pump in our e36.Let's start with the E36's fuel demands:Now obviously all of these figures are hugely dependent on the turbo, cams, displacement, and so fourth. Regardless they are ...

E36 - Ford 8.8 Rear End Conversion - Unit Finalization and pricing
Published: 10-13-20 16:00:00
Product Releases
It has been a long time coming, but we are pleased to announce the completion of our Ford 8.8 super-case kit!Pre-order page link: Super F-88 Subframe KitIf you haven't been following along you can find some details here on Bimmerforums: bimmerforums.com or in our previous blog post here: 22rpd.comWe have final welded the first production unit in our new jig. This fixture allows us to produce these kits with consistent and accurate fitment every time!Let's recap some of t...

E36 - Ford 8.8 Rear End Conversion
Published: 09-28-20 10:54:25
Product Releases
Those of you who have seen our previous Bimmerforums thread have been patiently waiting for an update on our F88 differential conversion for the E36 chassis. We've all been busy around the shop the last few months, but we are approaching the testing phase for our rear end! To ensure a flawless fitment, we have created a jig based off of the original E36 subframe. Take a peek at some renders of the assembled unit!We will soon be releasing more details, including pricing and options!To view the fi...